Product Code
Product description
Product Picture
Info
Product Position
MAIN RIDGE CARRAGE
sits on the main and half ridge bodies to hold the ridge top cap. Not used on basic wall plate PWLA or the ventilated
RAIN BAFFLE BACK SECTION
this is placed in the back section of the full ridge body. Used with the rain baffle
RAIN BAFFLE
This is placed on the top wing of the main ridge body for weather purposes
RIDGE 'T' BOLT AND FIXING PLATE
this is pushed up through the hole in the centre of the ridge body allowing the ridge capping to be secured
VENTILATED WALL PLATE 5 DEGREE PACKER
placed behind the wall plate carriage to enable steeper pitch
VENTILATED WALL PLATE CARRAGE
Used with the ventilated wall plate main body to make one unit
VENTILATED WALL PLATE END CAP
used on the end of the ventilated wall plate to cover aluminium
VENTILATED WALL PLATE MAIN BODY
Used with the ventilated wall plate carriage to make one unit
VENTILATED WALL PLATE TOP CAPPING
To be connected to the ventilated wall plate carriage for water proofing
VENTILATED WALL PLATE CLADDING
to be connected to the ventilated wall plate main body and the wall