Product Code
Product description
Product Picture
Info
Product Position
FIXING SCREWS
Used top and bottom of the glazing bar to allow securing of the clicklock hub to glazing bar
TRANSOM GLAZING BAR TOP CAPPING
used for transoms only
SECURITY CLIP
slide in end of the glazing bar once the glazing and the glazing bar top cap is seated in place. This stops top cap removal once fitted
FIRRING POLY SUPPORT ENDCAP
seated at the lower end of the glazing bar
ALUMINIUM GLAZING BAR
pushes inside the glazing bar sleeve for structural support
STEEL REINFORCEMENT
slots inside the aluminium glazing bar section for structural support over a max length
GLAZING BAR SLEEVE
plastic cover sleeve (viewable glazing bar sleeve from internal view)
LOW PROFILE GLAZING BAR TOP CAPPING
used for abutment detail only
SLEEVE WEATHERING MOULDING
located between the top of the glazing and the clickloc hub as a seal
CLICKLOCK HUB
found top and bottom of the glazing bar which allows connection to the eaves beam and wallplate
GLAZING BAR ENDCAP RETENTION CLIP
supplied clipped into the end cap
TRANSOM ENDCAP
seated at the lower end of the glazing bar
HIP BAR END CAP
Located at the bottom of the starter bar and is Required for the elevation plus only.
STARTER/ABUTMENT BAR SLEEVE
Internal cover sleeve for the starter /abutment bar
STARTER/ABUTMENT BAR TO EAVES CONNECTOR
Black plastic connector which connects the glazing bar to the wallplate
STARTER BAR END CAP
seated at the lower end of the starter glazing bar
ALUMINIUM STARTER / ABUTMENT BAR
used on elevation plus against the wall from the hub and for abutment details (down wall sides)
LOW PROFILE GLAZING BAR TOP CAP
used only for starter bar/ abutment detail