Product Code
Product description
Product Picture
Info
Product Position
EAVES FLOW VENTILATION UNIT ETV001
locates in the wallplate section to allow the glass to seat flat
INTERNAL FASCIA CLADDING
click 'onto' the wallplate as a internal fascia cover trim
GLAZING BAR 'V' COVER TRIM
Connects into the 'V' cover back plate located against the wallplate as a trim around the glazing bar (where it hits the wallplate)
V' COVER TRIM BACKPLATE
Locates against the wallplate as a back plate for the glazing bar 'V' cover trim and to join the wallplate internal fascia
WALLPLATE TOP CAP
locates into the wallplate main body
WALLPLATE BAFFLE
locates into the wallplate main body and creates a seal for the glazing
WALLPLATE UNDERCLADDING
located under the wallplate as an internal trim
ALUMINIUM WALLPLATE MAIN BODY
Aluminium Ridge body/wallplate
ELEVATION PLUS HUB WEATHERING PLATE
conservaflash weathering hub that locates above the 'joint' on the Ele plus system
QUARTER HUB ASSEMBLY
located at the end of the wallplate to allow the starter bar/abutment bar to connect to the ridge/wallplate
ELEVATION PLUS EXTERNAL HUB COVER
connects on to the hub weathering plate and acts as an external cover.
WALLPLATE END CAPS (TOP COVER)
connected to the end of the wallplate (top cover)
ELEVATION PLUS INTERNAL HUB COVER
locates where the wall eaves hits the ridge body (on the top internal hip end corner) as a trim
WALLPLATE END CAPS (BOTTOM COVER)
connected to the end of the wallplate (bottom cover)
SCREW
Screws used to secure the Quarter hub to the wallplate