SPIGOT NUT

9mm hole

used inconjunction with the twin bolts/ single bolts. The nuts spigot sits inside the 9mm hole in the glazing bar

SQUARE HEAD SINGLE BOLT

21.5mm long

used on both eaves and ridge bodies to secure the glazing bars where doubles can't be used I.E. 90 degree corners

TIE BAR BRACKET

fixed to the glazing bars for attachment of the tie bar system

TIE BAR CONDUIT

used as a cover/cladding for the tie bar threaded rod

TIE BAR EXTENDER

Used to extend tie bar threaded rod when our standard lengths are not long enough.

TIE BAR FIXING KIT

contains everything for tie bars except threaded rod, conduit and brackets/screws

TIE BAR BRACKET BOLT

Used when tie bars are required on glazing bars that have steel reinforcement inserted

TIE BAR THREADED ROD

used when a tie bar is specified on a roof, these connect the ridge to the glazing bars via brackets.