Product Code
Product description
Product Picture
Info
Product Position
CRN/1
LOWER SECTION CORNICE

Mill Finish
>>
attaches to the top of the eaves beam base

Instead of UGTB
CRN/2
MID SECTION CORNICE

Mill Finish
>>
screws to the lower section cornice CRN450/1
CRN/3
TOP SECTION CORNICE

Mill Finish
>>
screws to the middle section of the cornice
Not Sold Seperately
LOWER SEB SECTION CORNICE

Mill Finish
>>
when using 60mm frames this is used to cover the gap and attaches to the lower section cornice
CRN600
LOWER SEB SECTION CORNICE

Mill Finish

The code listed above is CRN/1 and CRN/4 together 
>>
This is with the CRN600/4 connected to it.
Customer would order this if using 60mm frames
CRN090
CORNICE EXTERNAL CORNER 90°
>>
These are used on external 90 ° corners only.

No internal 90° corners are available
CRN135
CORNICE EXTERNAL CORNER 135°
>>
These are used on external 135° degree corners only.

No internal 135° corners are available