Product Code
Product description
Product Picture
Info
Product Position
ACC001
ALUMINIUM CLADDING FINIAL ADAPTOR
MILL & POLISH
>>
Located on the radius end as a low profile finial
ACC002
FIXING - FINIAL ADAPTOR
M8x50 BUTTN HD SCREW
>>
This locates down and secures the low profile finial
ACF001

ALUMINIUM SAND CAST
BALL FINIAL

Secured to the radius end cover as a decorative feature
ACP001

ALUMINIUM FULL RIDGE
RADIUS END COVER

Located on the end of the full ridge top capping.

ACP002

BRUSH FOR
ALUMINIUM FULL RIDGE
RADIUS END COVER

The soft brush should be located in the full ridge radius end capping.

ACP003

RADIUS END CLAMP WASHER
This plate is used to secure the radius end to the ridge top cappings using the standard twin bolt (SHBC001T)
ACP004

RADIUS END FLASHING TRIM

This is located under the radius end cappings and used as a weathering shield. This is sealed down with the BAS075BL sealant.

ACP004/1

FLASHING TRIM

This is located under the radius end cappings and used as a weathering shield. This is sealed down with the BAS075BL sealant.

ACP/1
ALUMINIUM RIDGE TOP CAP
>>
Located on top of the main ridge body
AHC001

ALUMINIUM HALF RIDGE
RADIUS END COVER

Located on either end of the half ridge top cappings.

AHC002

BRUSH FOR
ALUMINIUM HALF RIDGE
RADIUS END COVER

The soft brush should be located in the half ridge radius end capping.

AHC/1
ALUMINIUM HALF RIDGE TOP CAP
>>
Located on top of the Half ridge body
ALP/1
LOW PROFILE CRESTING
>>
Situated on top of aluminium ridge