Product Code
Product description
Product Picture
Info
Product Position
TIE BAR BRACKET ASSEMBLY
this is positioned against the transom bar and fixed using the BLTS001 hex screws
DEEP TIE BAR BRACKET COVER
this is a cover that slots over the tie bar bracket before the installation of the connection fork
TIE BAR CONNECTION FORK
connects to the tie bar bracket and allows the threaded rob to be screwed into it using the BLTS002 hex button screw
BLINDS TIE BAR SECTION INFILL
These are positioned around the tie bar brackets (push fit in to the above and below T section) to allow the blinds to be seated.
M10 HALF NUT (DIN 439)
these are used to secure the tie bar rod to the tie bar brackets.
M10 FULL NUT (DIN 934)
Placed on the ends of the threaded rod before inserting into the tie bar connection fork
M6 X 12mm HEX SOCKET BUTTON HEAD SCREW
used to secure the tie bar bracket to the glazing bars. these are used with standard flange nuts
M10 X 30mm HEX SOCKET BUTTON HEAD SCREW
these are used to secure the tie bar rod to the tie bar brackets.